module Data.Text.ParagraphLayout.Internal.Plain
    (Paragraph(..)
    ,ParagraphLayout(..)
    ,ParagraphOptions(..)
    ,SpanLayout(..)
    ,layoutPlain
    )
where

import Control.Applicative (ZipList(ZipList), getZipList)
import Data.Int (Int32)
import Data.List (mapAccumL)
import Data.List.NonEmpty (NonEmpty((:|)))
import qualified Data.List.NonEmpty as NonEmpty
import Data.Text.Foreign (lengthWord8)
import Data.Text.Glyphize
    (Buffer(..)
    ,ContentType(ContentTypeUnicode)
    ,Direction(..)
    ,FontExtents(..)
    ,GlyphInfo
    ,GlyphPos
    ,defaultBuffer
    ,fontExtentsForDir
    ,shape
    )
import Data.Text.ICU (Breaker, LocaleName, breakCharacter, breakLine)
import qualified Data.Text.ICU as BreakStatus (Line)
import Data.Text.Internal (Text(Text))
import qualified Data.Text.Lazy as Lazy

import Data.Text.ParagraphLayout.Internal.Break
import Data.Text.ParagraphLayout.Internal.Fragment
import Data.Text.ParagraphLayout.Internal.LineHeight
import Data.Text.ParagraphLayout.Internal.Paragraph
import qualified Data.Text.ParagraphLayout.Internal.ProtoFragment as PF
import Data.Text.ParagraphLayout.Internal.Rect
import Data.Text.ParagraphLayout.Internal.ResolvedSpan (WithSpan(WithSpan))
import qualified Data.Text.ParagraphLayout.Internal.ResolvedSpan as RS
import Data.Text.ParagraphLayout.Internal.Run
import Data.Text.ParagraphLayout.Internal.Span
import Data.Text.ParagraphLayout.Internal.TextContainer

-- | Lay out a paragraph of plain, unidirectional text using a single font.
layoutPlain :: Paragraph -> ParagraphLayout
layoutPlain p@(Paragraph _ _ _ opts) = paragraphLayout sls
    where
        sls = map SpanLayout fragsBySpan
        fragsBySpan = take (length spans) $ RS.splitBySpanIndex frags
        frags = layoutAndAlignLines maxWidth $ spansToRunsWrapped spans
        maxWidth = paragraphMaxWidth opts
        spans = resolveSpans p

-- | Split a number of spans into a flat array of runs and add a wrapper
-- so that each run can be traced back to its originating span.
spansToRunsWrapped :: [RS.ResolvedSpan] -> [WithSpan Run]
spansToRunsWrapped ss = concat $ map spanToRunsWrapped ss

-- | Split a span into runs and add a wrapper
-- so that each run can be traced back to its originating span.
spanToRunsWrapped :: RS.ResolvedSpan -> [WithSpan Run]
spanToRunsWrapped s = map (WithSpan s) (spanToRuns s)

-- | Create a multi-line layout from the given runs, splitting them as
-- necessary to fit within the requested line width.
--
-- The output is a flat list of fragments positioned in both dimensions.
layoutAndAlignLines :: Int32 -> [WithSpan Run] -> [WithSpan Fragment]
layoutAndAlignLines maxWidth runs = frags
    where
        frags = concat fragsInLines
        (_, fragsInLines) = mapAccumL positionLineH originY canonicalLines
        canonicalLines = map canonicalOrder logicalLines
        logicalLines = layoutLines maxWidth runs
        originY = paragraphOriginY

-- | Reorder the given fragments from logical order to whatever order HarfBuzz
-- uses (LTR for horizontal text, TTB for vertical text), so that cluster order
-- is preserved even across runs.
canonicalOrder :: [WithSpan PF.ProtoFragment] -> [WithSpan PF.ProtoFragment]
canonicalOrder [] = []
canonicalOrder pfs@((WithSpan _ headPF):_) = case PF.direction headPF of
    -- TODO: Update for bidi.
    Just DirLTR -> pfs
    Just DirRTL -> reverse pfs
    Just DirTTB -> pfs
    Just DirBTT -> reverse pfs
    -- If no guess can be made, use LTR.
    -- TODO: Add explicit direction to input interface.
    Nothing -> pfs

-- | Create a multi-line layout from the given runs, splitting them as
-- necessary to fit within the requested line width.
--
-- The output is a two-dimensional list of fragments positioned along the
-- horizontal axis.
layoutLines :: Int32 -> [WithSpan Run] -> [[WithSpan PF.ProtoFragment]]
layoutLines maxWidth runs
    | null rest
        -- Everything fits. We are done.
        = fitting : []
    | otherwise
        -- Something fits, the rest goes on the next line.
        = fitting : layoutLines maxWidth rest
    where
        (fitting, rest) = layoutAndWrapRunsH maxWidth runs

-- TODO: Allow a run across multiple spans (e.g. if they only differ by colour).

-- | Position all the given horizontal fragments on the same line,
-- using `originY` as its top edge, and return the bottom edge for continuation.
--
-- Glyphs will be aligned by their ascent line, similar to the behaviour of
-- @vertical-align: top@ in CSS.
--
-- TODO: For rich text, allow other types of vertical alignment.
positionLineH :: Int32 -> [WithSpan PF.ProtoFragment] ->
    (Int32, [WithSpan Fragment])
positionLineH originY pfs = (nextY, frags)
    where
        -- A line with no glyphs will be considered to have zero height.
        -- This can happen when line breaking produces a line that contains
        -- onls spaces.
        nextY = if null rects then originY else maximum $ map y_min rects
        rects = map (\(WithSpan _ r) -> fragmentRect r) frags
        frags = snd $ mapAccumL (positionFragmentH originY) originX pfs
        originX = paragraphOriginX

-- | Position the given horizontal fragment on a line,
-- using `originY` as its top edge and `originX` as its left edge,
-- returning the X coordinate of its right edge for continuation.
positionFragmentH ::
    Int32 -> Int32 -> WithSpan PF.ProtoFragment -> (Int32, WithSpan Fragment)
positionFragmentH originY originX (WithSpan rs pf) = (nextX, WithSpan rs frag)
    where
        nextX = originX + PF.advance pf
        frag = Fragment rect (penX, penY) (PF.glyphs pf)
        rect = Rect originX originY (PF.advance pf) (-lineHeight)
        penX = 0
        penY = descent + leading `div` 2 - lineHeight
        lineHeight = case RS.spanLineHeight rs of
            Normal -> normalLineHeight
            Absolute h -> h
        leading = lineHeight - normalLineHeight
        normalLineHeight = ascent + descent
        ascent = ascender extents
        descent = - descender extents
        extents = fontExtentsForDir font (PF.direction pf)
        font = RS.spanFont rs

-- | Calculate layout for multiple horizontal runs, breaking them as necessary
-- to fit as much content as possible without exceeding the maximum line width,
-- and return the remaining runs to be placed on other lines.
layoutAndWrapRunsH :: Int32 -> [WithSpan Run] ->
    ([WithSpan PF.ProtoFragment], [WithSpan Run])
layoutAndWrapRunsH maxWidth runs = NonEmpty.head $ validLayouts
    where
        validLayouts = dropWhile1 tooLong layouts
        tooLong (pfs, _) = totalAdvances pfs > maxWidth
        layouts = NonEmpty.map layoutFst splits
        layoutFst (runs1, runs2) = (layout runs1, runs2)
        layout runs1 = layoutRunsH $ trimTextsEnd isEndSpace runs1
        splits = noSplit :| (lSplits ++ cSplits)
        noSplit = (runs, [])
        -- TODO: Use Soft/Hard line break distinction.
        lSplits = splitTextsBy (map fst . runLineBreaks) runs
        cSplits = splitTextsBy (map fst . runCharacterBreaks) runs

-- | The suffix remaining after removing the longest prefix of the list for
-- which the predicate holds, except always including at least the last element
-- of the original list.
dropWhile1 :: (a -> Bool) -> NonEmpty a -> NonEmpty a
dropWhile1 p list = case NonEmpty.uncons list of
    (_, Nothing) -> list
    (x, Just xs) -> if p x
        then dropWhile1 p xs
        else list

-- | Calculate layout for multiple horizontal runs on the same line, without
-- any breaking.
layoutRunsH :: [WithSpan Run] -> [WithSpan PF.ProtoFragment]
layoutRunsH runs = map layoutRunH runs

-- | Sum of all advances within the given fragments.
totalAdvances :: [WithSpan PF.ProtoFragment] -> Int32
totalAdvances pfs = sum $ map (\(WithSpan _ pf) -> PF.advance pf) pfs

-- | Calculate layout for the given horizontal run and attach extra information.
layoutRunH :: WithSpan Run -> WithSpan PF.ProtoFragment
layoutRunH (WithSpan rs run) = WithSpan rs pf
    where
        pf = PF.protoFragmentH dir glyphs
        glyphs = shapeRun (WithSpan rs run)
        dir = runDirection run

-- | Calculate layout for the given run independently of its position.
shapeRun :: WithSpan Run -> [(GlyphInfo, GlyphPos)]
shapeRun (WithSpan rs run) = shape font buffer features
    where
        font = RS.spanFont rs
        buffer = defaultBuffer
            { text = Lazy.fromStrict $ runText run
            , contentType = Just ContentTypeUnicode
            , direction = runDirection run
            , script = runScript run
            , language = Just $ RS.spanLanguage rs
            -- Perhaps counter-intuitively, the `beginsText` and `endsText`
            -- flags refer to everything that "Data.Text.Glyphize" can see,
            -- not just the current run.
            --
            -- Since all runs are cut from a single continuous `Text` that
            -- represents the entire paragraph, and "Data.Text.Glyphize" peeks
            -- at the whole underlying byte array, HarfBuzz will be able to see
            -- both the beginning and the end of the paragraph at all times,
            -- so these flags can always be set.
            , beginsText = True
            , endsText = True
            }
        features = []

resolveSpans :: Paragraph -> [RS.ResolvedSpan]
resolveSpans p@(Paragraph arr pStart spans pOpts) = do
    let sBounds = paragraphSpanBounds p
    let pEnd = NonEmpty.last sBounds
    let sStarts = NonEmpty.init sBounds
    let sLengths = map spanLength spans

    (i, s, sStart, sLen) <- getZipList $ (,,,)
        <$> ZipList [0..]
        <*> ZipList spans
        <*> ZipList sStarts
        <*> ZipList sLengths
    let lang = spanLanguage $ spanOptions s
    let lBreaks = paragraphBreaks breakLine p pEnd lang
    let cBreaks = paragraphBreaks breakCharacter p pEnd lang
    return RS.ResolvedSpan
        { RS.spanIndex = i
        , RS.spanOffsetInParagraph = sStart - pStart
        -- TODO: Consider adding checks for array bounds.
        , RS.spanText = Text arr sStart sLen
        , RS.spanFont = paragraphFont pOpts
        , RS.spanLineHeight = paragraphLineHeight pOpts
        , RS.spanLanguage = lang
        , RS.spanLineBreaks = subOffsetsDesc (sStart - pStart) lBreaks
        , RS.spanCharacterBreaks = subOffsetsDesc (sStart - pStart) cBreaks
        }

paragraphBreaks :: (LocaleName -> Breaker a) -> Paragraph -> Int -> String ->
    [(Int, a)]
paragraphBreaks breakFunc (Paragraph arr off _ _) end lang =
    breaksDesc (breakFunc (locale lang LBAuto)) paragraphText
    where
        paragraphText = Text arr off (end - off)

runLineBreaks :: WithSpan Run -> [(Int, BreakStatus.Line)]
runLineBreaks (WithSpan rs run) =
    runBreaksFromSpan run $ RS.spanLineBreaks rs

runCharacterBreaks :: WithSpan Run -> [(Int, ())]
runCharacterBreaks (WithSpan rs run) =
    runBreaksFromSpan run $ RS.spanCharacterBreaks rs

-- | Constrain span breaks to a selected run and adjust offsets.
runBreaksFromSpan :: Run -> [(Int, a)] -> [(Int, a)]
runBreaksFromSpan run spanBreaks =
    dropWhile (not . valid) $ subOffsetsDesc (runOffsetInSpan run) spanBreaks
    where
        valid (off, _) = off < runLength
        runLength = lengthWord8 $ getText run

-- | Predicate for characters that can be potentially removed from the end of
-- a line according to the CSS Text Module.
isEndSpace :: Char -> Bool
isEndSpace c = c `elem` [' ', '\t', '\x1680']